DS-E3 equalizer

New Amplification and Power Supply Circuits In the DS-E3 equalizer, the amplification circuit has been made symmetrical, and the voltage supplied to the cartridge has been stabilized to achieve a clearer and faster sound. Miniaturization is achieved by using an operational amplifier The DS-E3 equalizer uses an operational amplifier as the amplifying element to minimize the signal path, thereby greatly reducing the number of components and achieving a smaller size. As a result, the DS-E3 equalizer is about 1/3 the size of the DS003 equalizer.

Truly beyond price.

Output voltage : 500mV(1kHz) Output impedance : 120Ω Pre amp input impedance : More than 10kΩ Input terminal : RCA terminal Output terminal : RCA terminal (Switch two outputs with switch) Size : W26cm×H6.9cm×D19.5cm Weight : 1.86kg

DS-E3 Optical Cartridge

Uses a third-generation optical cartridge mechanism The DS-E3 uses a third-generation optical cartridge mechanism, the same design as our other products. The DS-E3 achieves an overwhelmingly low price while inheriting the merits of the third-generation mechanism, such as higher output due to independent LED and PD, improved channel separation, and the use of a beryllium light shielding plate. Aluminum cantilever with elliptical needle The cantilever is made of aluminum and the needle tip is a solid elliptical needle. While adopting the third-generation optical cartridge mechanism, the channel separation is set 1db lower to improve mass production efficiency.

Truly beyond price.

The DS-E3 is a revolutionary technology in historic record reproduction. Ikuo Tsunoda, Audio Critic

Signal output : Photo-electric Conversion Channel separation : 26db more (1kHz) Weight : 7.7g Output signal level : 70mV more Canti-lever : Alminum Body material : Alminum Needle pressure : 2.0g~2.2g(2.1g is recommended) Stylus : Elliptical Needle